May 2007: ICM®flex Tan Delta and PD measurement on HV potential via Bluetooth communication The newly introduced ICM®flex high voltage instrument family offers inherent operator safety and greatly simplifies distribution class cable testing and other field tasks involving partial discharge and tan delta testing. With the unique concept of the ICM®flex instruments the entire acquisition hardware is placed on high voltage potential right at the position where the signals are. Thus, no signal cables are needed, as the instrument is fully self-contained and battery operated. The instruments are fully remote controlled via high speed Bluetooth® communication. Product Information ICMflex

November 2006: SPECmonitor PD monitoring with selectable measurement frequency The SPECmonitor is a partial discharge analyzer comprising a spectrum analyzer, an acoustic detector, and a conventional partial discharge (PD) monitor in one instrument. This combination enables PD measurements even with a large background noise e.g. on power transformer within substations or power plants. Observing the frequency spectrum of a harshly disturbed PD signal allows to select frequency bands with less disturbances. Using this selected frequency for a PD acquisition, gives a largely improved signal-to-noise ratio resulting in a clear pattern acquisition. The combination of spectrum analyzer and PD detector within one instrument greatly expands the measurement possibilities when analyzing the insulation systems in a noisy environment.

May 2006: RIVmeter stand alone instrument The RIVmeteris an instrument for the measurement of 'Radio Influence Voltage' according to NEMA 107-1987 and other relevant standards. The instrument has a bandwidth of 9 kHz and a tunable center frequency of 600-1300 kHz. Technically, the RIVmeter is a selective µV-meter. However, the meter reading is weighted according to the CISPRE weighting curve, whereas the repetition rate has a strong impact on the reading. The RIVmeter is an ideal instrument to replace outdated RIV measurement instruments in a transformer testing lab.

Dec. 2005: SPECcompact combines spectrum analysis and partial discharge measurement The SPECcompactcomprises a spectrum analyzer, a partial discharge (PD) detector and an RIV meter in one instrument. This combination enables PD measurements even with a large background noise e.g. in non-shielded test areas.

April 2005: RIV Measurement Option for the ICMsystem or ICMsys8 This new option allows parallel PD measurement in pC and in µV with the ICMsystem or ICMsys8.

June 2004: Battery option for ICMcompact and AIAcompact and infrared synchronization The new cordless option for the ICMcompact and AIAcompact enables full flexibility during on-site measurements and field tests. The built-in charger allows 3 hours independent operation. An additional box sending an infrared synchronization signal provides the instrument with the correct phase information.

Jan. 2004: Certified calibration laboratory By end of December 2003, the calibration laboratory of Power Diagnostix received the accreditation as calibration laboratory within DKD (Deutscher Kalibrierdienst). The audit for the accreditation was held by 'Physikalisch Technische Bundesanstalt' (PTB), the German authority of standards. Power Diagnostix calibration laboratory received the accreditation for impulse charge (pC), AC and DC voltages, as well as impulse timing parameters. Thus, Power Diagnostix is able to issue calibration certificates traceable to international standards. Download Cetrificate Download Specification of Calibration Quantities

Nov. 2003: TDAcompact: tan delta measurement instrument The TDAcompact is a portable capacitance and tand analyzer. The focus of the instrument's application is on the analysis of the epoxy-mica insulation of rotating machines. Besides this, the unit is applicable for oil-paper insulation systems and especially for mass-impregnated cables. Product Information TDAcompact

Oct. 2003: AIAcompact combines acoustic and UHF PD measurement The AIAcompact is a portable unit for in-service acoustic partial discharge measurements on gas-insulated switchgear (GIS), transformers, and cable accessories. The instrument adapts to a variety of piezo-electric acoustic sensors and is supplied with a versatile sensor fixture. Additionally, the AIAcompact allows optionally partial discharge measurements on embedded or external UHF sensors. Product Information AIAcompact

Jun. 2003: ICMcompact multi channel versions The new version of the ICMcompact offers optionally an integrated 4 channel multiplexer, an external 12 channel multiplexer, or for a single channel unit, the RAM extension to 12 different setups. Product Information ICMcompact

Resellers and Agents wanted We are looking for further companies and individuals to represent Power Diagnostix. Experience in the field of partial discharge testing and a well-established market access is a must. Service groups and maintenance firms providing service in the utility market are welcome as well. Please contact Power Diagnostix for details. Calibration service Re-calibration of the calibration impulse generators, such as the CAL1A - CAL1E or CAL2A and CAL2B, ensures the required tracability of your measurements. A calibrator received for re-calibration will be shipped within few days. This service is offered at a very competitive price. Also, an annual routine check for the instruments is offered. Hardware & Software Upgrade Packages Existing instruments of the ICM product range (ICMsystem, ICMcompact, and ICMmonitor) can be upgraded to the current firmware providing access to the recent improvements. Enhanced communication properties, built-in modems, gating circuits and much more is covered by these hardware upgrades. The graphical user interfaces (GUI) for the instruments are completely re-written to run under Windows 3.X, Win95/98, or WinNT. They offer several new features, such as consecutive measurements, modem support, and improved printing, for example. A simplified, user-friendly operation mode of the ICMsystem will be released shortly. A software upgrade includes download access to our web site for one year. Ask for a permanent download access to keep track of the ongoing improvements of our software. Please contact Power Diagnostix for detailed information.

Power Diagnostix Systems GmbH Bruesseler Ring 95a, 52074 Aachen, Germany Tel. +49 241 74927, Fax. +49 241 79521 Home : www.pdix.com